Mackie SRM-450
De Mackie SRM 450 is de ideale klankkast voor kleinere feesten (zowel
binnen als buiten). Laat je niet misleiden door de grootte en het gewicht van
deze speaker: hij speelt enorm zuiver en door de geďntegreerde technologie
geeft hij een perfecte basweergave, zelfs bij hoog volume. Niet voor niets
gebruiken wij deze pareltjes op al onze events !
Voor grotere feesten zijn deze perfect te combineren met onze subkasten:
Forget about what other small PA speakers sound like. Especially forget what so-called "powered" speakers sound like. The active SRM450 is that different.
It has tight, steel-fisted bass to below 55Hz and detailed, articulate treble out to 20,000Hz. Midrange is warm, natural, and free from ear-fatiguing harshness. The SRM450 has astonishingly wide dispersion that lets your whole audience hear clearly, whether they're in the front, back, or way out on the sides of the room.
And above all, the SRM450 cranks! Without a hint of distortion, it effortlessly achieves sound pressure levels that would melt conventional speakers into a pile of molten slag.
Features:
- 2-way bi-amplified, optimized active system - no external power amplifier needed!
- Built-in monolithic FR Series™ 300 watt RMS bass & 100 watt RMS mid/high amplifiers
- Built-in precision 24dB/oct. Linkwitz-Riley electronic crossover
- 300mm long-throw frequency transducer
- High-output precision titanium compression driver
- Studio-quality maximum dispersion horn design
- High SPL Output/Low Distortion
- Electronic Time Correction, Phase Alignment, & Equalization
- Servo Feedback controlled woofer
- Tough, impact-resistant, lightweight polypropylene enclosure
System:
- Input Type Balanced Differential
- Input Impedance Line: 20k ohms
- Input Protection RFI and level protected
- Sensitivity Line: +4 dBu
- Mic: -36 dBu
- Maximum Input Level Line: +22 dBu
- Low-Cut Frequency 75Hz, Second-order filter
- Acoustic Contour Equalization Peaking:
- +3 dB @ 100Hz
- +3 dB @ 12kHz
- Enclosure Alignment Sixth-Order
- Over-Excursion Protection Second-Order
- High-Pass Filter
- Thermal Protection Amplifier shutdown, auto reset
- Low-Line Voltage Shut Down 60% Nominal line
- Frequency Range (-10 dB) 45Hz - 20KHz
- Frequency Response (±3 dB) 55Hz - 18kHz
- Maximum Peak SPL @ 1m 127 dB
- Low-Freq Crossover 24 dB/octave, time offset corrected
- High-Freq Crossover 24 dB/octave
- Crossover Frequency 1.6kHz
- Driver Protection Independent LF and HF compressors
- Low-Freq Roll-Off Dynamic-signal level dependent
- Accessory Interface ±15V DC, normalized signal I/O
- Operating Temperature Range -10°C to 45° C
- (14°F to 113°F)
Transducer:
- Low-Frequency Transducer:
- Diameter 300mm (12")
- Power Handling 450 watts RMS
- Frequency Range 45Hz - 3kHz
Hi-Frequency Driver and Horn:
- Diaphragm Diameter 44mm (1.75")
- Exit Throat Diameter 25mm (1")
- Diaphragm Material Titanium
- Sensitivity (1W@1m) 106 dB
- Power Handling 100 watts RMS
- Frequency Range 1kHz - 20kHz
- Horn Type Composite: Exponential and Conical
- Mouth Size 305mm (12") W x 178mm (7") H
Power Amplifier and System:
- Low-Frequency Power Amplifier:
- Rated Power 300 watts RMS
- Rated THD < 0.1%
- Cooling Convection Extrusion
- Design Class G, Parametric Servo Feedback
High-frequency amplifier:
- Rated Power 100 watts @ High-Frequency Driver Impedance
- Cooling Convection Extrusion
- Rated THD < 0.1%
- Design Conventional Class AB
Line Input Power:
- US 120V, 60Hz
- Europe 230V, 50Hz
- Japan 100V, 50/60Hz
Physical Properties:
- Height 660mm (26")
- Width 390mm (15.4")
- Depth 376mm (14.8")
- Weight 23.2kg (51 lbs.)
Enclosure Geometry Asymmetrical Trapezoidal
Mounting Methods Integrated mounting points, M10
Since we're always striving to make our stuff better by incorporating new and improved materials, components and manufacturing methods, we reserve the right to change these specifications at any time without notice
